CompuLab SBC-FITPC2 Manual de usuario descargar pdf (Pagina 6)

4. Building and installing village-telco package

Detailed information of how to build the village-telco debian package is available

here:

http://dev.villagetelco.org/trac

As discussed in the introduction section you will need to update your kernel to

ensure that the drivers for the Realtek gigabit cards are updated.

apt-get dist-upgrade

apt-get install linux-headers-generic-pae

if you see error messages like the following it means that you need to rebuild your

asterisk DAHDI drivers. DAHDI (former Zaptel) is the open source device interface

technology used to control Digium and other legacy telephony interface. Although

you do not need the drivers to run the basic Asterisk services, unfortunately

asterisk package for Ubuntu has built depedencies on the dadhi package.

Unloading DAHDI hardware modules: done

Loading DAHDI hardware modules:

FATAL: Error inserting dahdi (/lib/modules/2.6.32-38-generic-

pae/updates/dkms/dahdi.ko): Unknown symbol in module, or unknown parameter (see

dmesg)

dahdi: error dahdi_dummy: error dahdi_transcode: error

Error: missing /dev/dahdi!

invoke-rc.d: initscript dahdi, action "start" failed.

Dahdi drivers not found!

After reboot, rebuild DADHI issuing the command:

/var/lib/dpkg/info/dahdi-dkms.postinst configure

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Sin comentarios

CompuLab SBC-FITPC2 Manual de usuario Pagina 6